Connector systems for a wide range of circuit board applications, with pitches of 1.27-5.08 mm (.050–.200").
Insulation displacement and crimp technology allow a cost-effective harnessing, from low to high-volume production.
Solder profiles for RoHS compliant components (PDF)
General product information
|
|
 |
|
|
Series 30, Micromodul connectors, pitch 1.27 mm |
|
For cable-to-board connections with flat cables, where space is at a premium. Plugs and solder-in connectors in insulation displacement technology, tab headers for THT and SMT soldering. For signal and low load currents up to 1.2 A, pitch 1.27 mm (.050").
|
Products
|
|
|
 |
|
 |
|
|
Series 31, Minimodul connectors, pitch 2.50 mm |
|
For cable-to-board and board-to-board connections. Easy harnessing of single leads and flat cables with insulation displacement and crimp technology. Especially suitable for low and middle-volume production. For signal and low load currents up to 5 A. Pitch 2.50 mm (.098").
|
Products
|
|
|
|
|
 |
|
|
Series 35, Duomodul connectors, pitch 2.50/5.00 mm, RAST 2.5 |
|
Direct and indirect mating, for cable-to-board and cable-to-cable connections in insulation displacement technology. Keying according to RAST 2.5 standard avoids mismating. For signal and load currents up to 6 A, pitch 2.50 mm and 5.00 mm (.098" and .197").
|
Products
|
|
|
|
|
 |
|
|
Series 36, Macromodul connectors, pitch 5.00 mm, RAST 5 |
|
Direct and indirect mating, for cable-to-board and cable-to-cable connections with insulation displacement or screw clamp termination. Keying according to RAST 5 standard avoids mismating. Numerous tab headers and socket boards free to configure, special versions for higher temperatures. For signal and load currents up to 16 A, pitch 5.00 mm (.197").
|
Products
|
|
|
|
|
 |
|
|
Series 38, Multimodul connectors, pitch 2.50 mm |
|
For cable-to-board and board-to-board connections. Easy harnessing of single leads and flat cables with insulation displacement and crimp technology. Especially suitable for middle and high-volume production. For signal and low load currents up to 3 A, pitch 2.50 mm (.098").
|
Products
|
|
|
|
|
 |
|
|
Series 41, Shorting links, pitch 2.50/2.54 mm |
|
For direkt connection of two contact pins, i.e. as a jumper for alternative circuitry. Shorting links are suitable for pin headers with pitch 2.5 mm and 2.54 mm (.098" and .100"). For signal and load currents up to 5 A.
|
Products
|
|
|
|
|
 |
|
|
Series 51, Direct connectors for insert cards, pitch 2.50–5.08 mm |
|
Sockets boards for insert cards, with solder pins for board-to-board or solder eyes for cable-to-board connections. With accessory keying inserts, mounting and guide flanges. For signal and load currents up to 5 A, pitch 2.5 mm, 2.54 mm, 3.96 mm, 5.0 mm and 5.08 mm (.098", .100", .156", .197", .200").
|
Products
|
|
|
|
|
 |
|
| Series 52, Direct connectors for insert cards, pitch 5.0 mm |
| Sockets boards for insert cards, with screw clamps for cable-to-board connections. With accessory keying inserts, mounting and guide flanges. For signal and load currents up to 5 A, pitch 5.0 mm (.197"). |
Products
|
|
|
|
|
 |
|
| Series 97, Tools and harnessing machines |
| The complete processing equipment for crimp and insulation displacement technology (IDT) connector systems. Depending on your needs, choose from manual, semi and fully automated solutions for low, middle or high volume production.
|
Products
|
|
|
|
|
|
